360 Degree Turbo Nozzle for Pressure Washer with Brass Body Tips

360 Degree Rotating Turbo Pressure Washer Nozzle with Brass Body and Five Colour Coded Tips

A nozzle that spreads too thin leaves grime sitting there no matter how many passes you make. You keep going back over the same patch and the job takes twice as long. Blast a patio clean, rinse a vehicle safely, or tackle a dirty wall faster.

These colour-coded tips swap in based on the angle and task while the 1/4 inch quick connect snaps onto most pressure washers without any tools. The turbo head spins a full 360 degrees so each pass covers more ground.

The solid brass body and brass-plated plug resist oxidation and corrosion outdoors. It holds steady at up to 4000 PSI without cracking during heavy sessions. Rated to 140°F and 60°C so hot water sessions run without affecting performance.

It draws soap solution through the nozzle mid job without swapping tips thanks to the built-in soap setting. The vehicle-safe angle reduces pressure for rinsing car surfaces without risking paint damage. All five colour-coded tips are included so you start fully equipped.

• 360 DEGREE TURBO HEAD: Spinning head rotates a full 360 degrees while spraying to cover a wider path per pass.
  
  
• QUICK CONNECT FITTING: 1/4 inch quick connect snaps onto most residential and commercial pressure washers without tools.
  
  
• FIVE COLOUR CODED TIPS: Swappable tips let you match angle and pressure to the surface or task in front of you.
  
  
• 4000 PSI PRESSURE RATING: Holds steady under up to 4000 PSI without cracking or losing output during heavy sessions.
  
  
• HOT WATER COMPATIBLE: Rated to 140°F and 60°C so hot water wash sessions run without affecting nozzle performance.
  
  
• BRASS CORROSION RESISTANCE: Solid brass body and brass-plated plug resist oxidation and corrosion through extended outdoor use.
  
  
• BUILT IN SOAP SETTING: Draws cleaning solution through the nozzle mid job so you apply soap without ever swapping tips.
  
  
• VEHICLE SAFE PRESSURE OPTION: Stepped-down angle reduces pressure for car rinsing so surfaces stay safe during the wash.

Product Specifications

• Type: 360-Degree Rotating Turbo Pressure Washer Nozzle
• Body Material: Solid Brass
• Plug Material: Brass-Plated
• Maximum Pressure: 4000 PSI
• Maximum Temperature: 140°F / 60°C
• Connection: 1/4 Inch Quick Connect
• Tips Included: 5 Colour-Coded Spray Tips
• Special Settings: Soap Mode, Vehicle-Safe Angle, Turbo Spray Nozzle with Quick Connect Fitting, Soap Mode, and Vehicle-Safe Pressure Option

What's Included

• 1 x Rotating Turbo Pressure Washer Nozzle
• 1 x White Spray Nozzle Tip
• 1 x Green Spray Nozzle Tip
• 1 x Red Spray Nozzle Tip
• 1 x Yellow Spray Nozzle Tip
• 1 x Black Spray Nozzle Tip

Frequently Asked Questions

Will this fit my existing pressure washer without an adapter?
The 1/4 inch quick connect fitting is compatible with most standard residential and commercial pressure washers and snaps on without any tools, though checking your washer's inlet fitting size beforehand is recommended to confirm compatibility.

Which tip should I use for washing my car?
The vehicle-safe tip is the appropriate choice for rinsing car surfaces as it steps down the pressure to a level that cleans effectively without risking paint damage or stripping protective coatings during the wash.

Can I use this with a hot water pressure washer?
Yes, the nozzle is rated to handle temperatures up to 140°F and 60°C, so it performs reliably through hot water wash sessions that may help reduce warping, cracking, or losing output under sustained heat.

Do I need to swap tips to apply soap during a session?
No, the built-in soap setting draws cleaning solution directly through the nozzle mid job so you can apply detergent and switch back to rinsing without stopping to change tips or interrupt your workflow.